Showing posts with label quad. Show all posts
Showing posts with label quad. Show all posts
Saturday, September 20, 2014
4 × 40 W BTL quad car radio power amplifier
FEATURES:
Requires very few external components
High output power
Low output offset voltage
Fixed gain
Diagnostic facility (distortion, short-circuit and temperature pre-warning)
Good ripple rejection
Mode select switch (operating, mute and standby)
Load dump protection
Short-circuit safe to ground and to VP and across the load
Low power dissipation in any short-circuit condition
Thermally protected
Reverse polarity safe
Electrostatic discharge protection
No switch-on/switch-off plop
Flexible leads
Low thermal resistance
Pin compatible with the TDA8568Q, except for the gain.
GENERAL DESCRIPTION:
The TDA8571J is a integrated class-B output amplifier contained in a 23-lead Single-In-Line (SIL) plastic power package. It contains four amplifiers in a BTL configuration, each with a gain of 34 dB. The output power is 4 × 40 W (EIAJ) into a 4 Ω load.
APPLICATIONS:
Primarily developed for car radio applications
Circuit Diagram:
 |
| 4 × 40 W BTL quad car radio power amplifier |
Sunday, August 17, 2014
4 x 46 W quad bridge car radio amplifier TDA7384A
Features
■ High output power capability:
– 4 x 46 W / 4 max.
– 4 x 27 W / 4 @ 14.4 V, 1 kHz, 10 %
■ Low distortion
■ Low output noise
■ Standby function
■ Mute function
■ Automute at min. supply voltage detection
■ Low external component count:
– Internally fixed gain (26 dB)
– No external compensation
– No bootstrap capacitors
■ Protections:
– Output short circuit to GND, to VS, across
the load
– Very inductive loads
– Overrating chip temperature with soft
thermal limiter
– Load dump voltage
– Fortuitous open GND
– Reversed battery
– ESD
Description
The TDA7384A is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed
■ High output power capability:
– 4 x 46 W / 4 max.
– 4 x 27 W / 4 @ 14.4 V, 1 kHz, 10 %
■ Low distortion
■ Low output noise
■ Standby function
■ Mute function
■ Automute at min. supply voltage detection
■ Low external component count:
– Internally fixed gain (26 dB)
– No external compensation
– No bootstrap capacitors
■ Protections:
– Output short circuit to GND, to VS, across
the load
– Very inductive loads
– Overrating chip temperature with soft
thermal limiter
– Load dump voltage
– Fortuitous open GND
– Reversed battery
– ESD
Description
The TDA7384A is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed
for high end car radio applications. Based on a fully complementary PNP/NPN configuration, the TDA7384A allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extremely reduced boundary components count allows very compact sets.
Circuit Diagram
 |
| 4 x 46 W quad bridge car radio amplifier |
Subscribe to:
Posts (Atom)
