Saturday, September 20, 2014

4 × 40 W BTL quad car radio power amplifier

FEATURES:

Requires very few external components
High output power
Low output offset voltage
Fixed gain
Diagnostic facility (distortion, short-circuit and temperature pre-warning)
Good ripple rejection
Mode select switch (operating, mute and standby)
Load dump protection
Short-circuit safe to ground and to VP and across the load
Low power dissipation in any short-circuit condition
Thermally protected
Reverse polarity safe
Electrostatic discharge protection
No switch-on/switch-off plop
Flexible leads
Low thermal resistance
Pin compatible with the TDA8568Q, except for the gain.

GENERAL DESCRIPTION:

The TDA8571J is a integrated class-B output amplifier contained in a 23-lead Single-In-Line (SIL) plastic power package. It contains four amplifiers in a BTL configuration, each with a gain of 34 dB. The output power is 4 × 40 W (EIAJ) into a 4 Ω load.

APPLICATIONS:

Primarily developed for car radio applications

Circuit Diagram:
4 × 40 W BTL quad car radio power amplifier


No comments:

Post a Comment